In order to be able to setup multiple lines at once with the provisioning service, you must enter the handset IPUI in the provisioning setting…
Due to an issue with the security of the TLS certificate used by Snom DECT, many of the older hardware versions are no longer supported…
Installation Configuration Assistant Check afterwards that outgoing calls are on IP1 and not a fixline. To check this do the following: Setting -> Telephony -> Send-Connections…
Patton SN200 The Patton SN200 provides telco operators and enterprise users with a cost-effective solution for integrating legacy telephone, fax and metering equipment into an…
Enclosed you will find an overview of the telephone systems with which peoplefone SIP-TRUNK has been certified.
To use a handset (M25, M65, M85), the IPEI number of the handset must be entered in the web interface of the base station. The…
Standard UDP Connection Timeout (Seconds), must be 180s. The SIP Transformation must be switched off (disabled) Edit the access roles Click on Advanced Set the…
Introduction This method is no longer advised by us and therefore the documentation might not be to date, but kept published for posterity. This article…
The new W80 solution from Yealink can in principle only be operated in multi-cell mode.There must be at least 2 devices, a DECT manager (DM)…
Requirements Installation with peoplefone HOSTED This document is not intended for end users, but for installers who have knowledge of networks xtelsio is a tool…
